MENU

Flooring Installation Quick Check Kit - IQCK

Eliminate dew point issues when installing a floor

AVOID MOISTURE RELATED FLOOR FAILURES

The Tramex IQCK is a compact kit for performing the Installation Quick Check test, which is the instant, non-destructive, quantitative moisture content testing of concrete floors and ambient dew-point conditions at the time of installation. 

Even if pre-installation tests have been performed, checking the %MC and ambient dew-point conditions at the time of installation is crucial to ensure successful installation. The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete moisture content using Gravimetric testing as a baseline. The Infrared Thermometer and Dew Point Detector provides surface temperature readings and ambient temperature and dew point conditions to avoid condensation-related issues at the time of installation and floor failures. The Tramex Meters App allows for data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts. The Tramex Flooring Installation Quick Check Kit comes in a Tramex Easy-travel case.

Product Order Code: IQCK

	 
	

		
		


		  
	
	
	
	
	
	

	

		
		


		  
	
	
	
	
	
	

	
		
	
	
	
	
	
	
































 
	

Concrete Moisture Encounter 5  - CME5 - Measuring Range:

Depth of penetration: approx. ¾" (20 mm)
Moisture Content for Concrete: 0 to 6%
Comparative for Gypsum floor screed: 0 to 10
Reference scale: 0 to 100

 

Infrared Thermometer and Dew Point Detector - IRT2DP - Measuring Range:

Temperature Range: -58ºF to 716ºF (50°C to 380°C)
Display resolution: 0.1
Emissivity: Fixed at 0.95
Temperature accuracy: -58º to 32ºF / -50º to 20ºC: +/- 32º to 716ºF / 3.5ºC 20º to 380 ºC: +/-1.5ºC
Wavelength range: 8 – 14um
Humidity Range: 0 - 100% RH
Humidity accuracy: +/-3.5% (20% to 80%)
Dew point temperature: (-22 to 212)ºF / (-30 to 100)ºC
D:S: 20:1
Operating temp: 32 to 122ºF (0 to 50ºC)
Storage temp: -4 to 140ºF  (-10 to 60ºC)
Relative humidity: 10%-90%RH operating, <80%RH storage
Power Supply: 9V battery, NEDA 1604A or IEC 6LR61, or equivalent

 

Specifications of Kit:

Size: 13.2” x 9.5” x 3.2” (33.5cm x 24cm x 8cm)
Weight: 2.8lbs (1.3kg)
Power: 2 x AA batteries, 1 x 9 volt PP3 battery

Related Products

Calibration Check Plate

Calibration Check Plate

Calibration Check Plate for Tramex CME5CMEX5, CME4 and CMEX2. The calibration check plate allows for regular on-site calibration checks.

CALCRH
More Info

Extension Handle

Extension Handle

The Extension Handle can be used with the ME5CME5CMEX5 and Skipper 5 Moisture Meters. It is a useful accessory for measuring in out of reach, high places. It can also be used for taking readings on the floor and thus reduces the need for crouching or kneeling.

E5-HBS
More Info