MENU

TRAMEX METERS APP

Visualize, Map, Log, Geo-Tag and Report Moisture Readings

The Tramex Meters App is now your one go-to App for all Tramex Bluetooth devices – Tramex 5-Series Moisture Meters and Feedback Dataloggers. The Tramex Meters App has numerous features including those in previous Tramex Apps such as the Feedback Datalogger App and the Moisture Mapping App.

 

THE TRAMEX METERS APP & TRAMEX 5-SERIES MOISTURE METERS

 

Visualizing your meter readings:

On pairing any of your Tramex 5-series moisture meters to the Tramex Meters App, the meter name will appear on the screen of your mobile device. For the Moisture Encounter 5 - ME5, for example, tap on the meter information on your App screen to make the readings appear larger on the App device. An extension handle is available for the 5-series meters, to test those hard to reach places. The larger readings on the App allow for easy visualization of the readings when using the extension handle. 

 

Photographing & Geo-tagging your meter readings:

You can also take a photograph of the meter in the testing location. The photo shows the readings displayed on the bottom left hand corner of the screen and will be time-stamped by your device. It is possible to Geo-tag the image, providing vital supportive documentary evidence for your moisture measurements and readings. The same features are available for the Concrete Moisture Encounters - CME5 and CMEX5: enlarged visualisation of non-destructive %MC readings from the meter when on the extension handle; photographic and geo-tagged documentary evidence of your concrete moisture measurements. 

 

Moisture Mapping your readings:

You can save photographs or plan drawings of floor or wall surfaces to your App and use these as the background image  to grid-style moisture maps. The moisture reading values are entered into the map grids. The grid density can be adjusted to give more detail where needed. The completed moisture maps can be used in reports as explicative visual documentation as well as exported in files.

 

The CMEX5 hygrometer, RH probes and App:

The Concrete Moisture Encounter X5 - CMEX5 has a built-in ambient sensor. The Relative Humidity, temperature, dew-point and humidity ratio data all appear on the App screen. In-App Thermal Conditions Chart and Psychrometric Chart are also available for this meter. An external Hygro-i2® RH probe can be attached for in-situ readings, which are also visible on the App screen along with the ambient readings of the built-in RH sensor.

Narrow RH probes are available for taking readings in small or tight air spaces. When attaching a Tramex external Pin-probe, the pin readings are displayed on the App. The CMEX5 and App incorporate a selection of over 500 different wood species. There are 25 wood presets programmed in the CMEX5, these presets can be replaced with species chosen from the App.

Many more features will be added in due course.

 

THE TRAMEX METERS APP & TRAMEX FEEDBACK DATALOGGERS

 

The Feedback Dataloggers models DL-RHTA and DL-RHTX are equipped with an ambient sensor and plug-in ports for a Contact Temperature Probe. The DL-RHTX also features a plug-in port for an external Hygro-i2® RH probe. Once connected to the Tramex Meters App, ambient DataLogger readings will be shown on the screen of your device. In addition, you can also view a Thermal Condition Chart and a Psychrometric chart. These charts are also available for the external Hygro-i2® RH probe. This allows for visible and recordable logged data for both ambient and in-situ conditions to be documented. Many more features will be added in due course.