MENU

Hygro-i2 RH Probe - HIPP

FREE SHIPPING
for orders over $200
Average delivery time: 2 - 4 working days


Shipping charges do not include any duty or taxes applicable on import into countries outside of the EU and USA.

Reusable In-Situ Concrete RH Sensor for ASTM F2170

FOR CONCRETE RELATIVE HUMIDITY TESTING

The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with ASTM F2170 for the flooring industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The confidence in knowing you are testing with the best and fastest RH probe, together with the complete Tramex concrete moisture testing system, brings reliability and peace of mind in concrete moisture meters to a whole new level.

 

Hygro-i2 Probes are available in packs 1, 3, 6, 12, 25, 50 and 100. Product Codes HIPP1, HIPP3, HIPP6, HIPP12, HIPP25, HIPP50, HIPP100.

 

Please note that the RHIE2 Electronic Interface Cable is needed to connect the Hygro-i2 Probe.

 

Product Order Code: RHIE2 (For use with CMEX2 and MRH3)
Product Order Code: RHIE2B (For use with CMEX5, MEX5 and Feedback DL-RHTX)

	 
	

		
		


		  
	
	
	
	
	
	

	

		
		


		  
	
	
	
	
	
	

	

		
		


		  
	
	
	
	
	
	

	

		
		


		  
	
	
	
	
	
	

	
		
	
	
	
	
	
	
































 
	
  • Fast acclimation time
  • Reusable Hygro-i2 ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test
  • Best in class accuracy, even at high RH >90%
  • Proven robustness, durability and reliability
  • Accurate, durable and best in class
  • Testing per ASTM F2170, giving in situ relative humidity and ambient RH, temperature, dew point temperature & grains per pound
  • Relative Humidity range:  0% to 100%
  • Fastest Temperature response time
  • Best temperature accuracy of +/-2º over 32ºF to 194ºF (0ºC to 90 ºC)
  • Temperature Range: -40ºF to 257ºF (-40ºC to 125ºC)

Used in conjunction with the Tramex CMEX5, CMEX2, MRH3 non-destructive moisture meters or the Feedback Datalogger DL-RHTX, the Hygro-i2 ® probe provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete flooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display.


The Hygro-i2 ® probes are reusable, paying for themselves after a few uses compared to single-use, disposable RH probes. Calibration checks can be carried out using the calibration check salts.
 

Relative Humidity Sensor Specifications: 

Range: 0 to 100%RH
Accuracy: 0% to 99%RH ±2.0%RH (@ 77ºF (25ºC))
Resolution: 0.1% over the complete range
Drift: <0.25%RH per year

 

Temperature Sensor Specifications: 

Range: -40ºF to 257ºF (-40ºC to 125ºC)
Accuracy: ±0.1ºF
Range: 68ºF to 140ºF (±0.1 °C Range 20°C to 60°C)
Sensor Protection: PTFE Film protects sensor opening from water & dust Drift: <0.04ºF (0.03ºC) per year NIST traceable. (National Institute of Standards and Technology)


 

Related Products

ASTM F2170 Accessory Pack

ASTM F2170 ACCESSORY PACK

The pack consists of 12 reusable Hygro-i2 probes, 1 interface cable, 1 calibration salt check and 100 19mmhole liners.

AP-F2170-B
More Info

Calibration Salt Check

Calibration Salt Check

Calibration Salt Check for Hygro-i probes. Designed to produce a 75% RH environment within the chamber which may be used to ensure the calibration of the Hygro-i ® RH probe is optimum.

SAL75
More Info

Tramex Hygro-i2® 19mm Hole Liners

Tramex Hygro-i2® 19mm Hole Liners

Hygro-i2® Hole Liners and Caps for use with Tramex Hygro-i2® relative humidity sensors. To perform ASTM F2170 in situ RH testing of concrete floors and slabs.

RHHL
More Info

Concrete Moisture Encounter CMEX5

Concrete Moisture Encounter CMEX5

The Concrete Moisture Encounter CMEX5 is The Digital Multi Moisture Meter for Concrete designed and built by Tramex Meters for the specific needs of many industries including the Flooring, Water Damage Restoration, Inspection, Surveying and Indoor Air Quality industries. Bluetooth connection allows for continual development and integration of apps and reporting to accompanying IOS & Android App.

CMEX5
More Info

Moisture Encounter MEX5

Moisture Encounter MEX5

The Tramex Moisture Encounter MEX5 is a digital Dual-Depth, non-destructive moisture and humidity meter, ideal for surveying moisture and humidity conditions in building structures.

MEX5
More Info

Feedback Datalogger Starter Kit

Feedback Datalogger Starter Kit

The Tramex Feedback DataLogger and App have been designed and developed by Tramex for professionals who depend on accurate, reliable readings using the very best, state of the art technology and performing ASTM F2170. 

FBSK5.1
More Info