MENU
Moisture Meters
RH Probes
kits
Accessories
Learn
Service
Tramex Cloud & APP
Tramex Moisture Meters - the authentic moisture meter

FLOORING INSTALLER TECH KIT - FTK

Tramex Flooring Installer Tech Kit Tramex Concrete Moisture Encounter 5 - CME5 Tramex Concrete Moisture Encounter 5 - CME5 Back Angle Feedback Datalogger DL-RHTX Contact Temperature Probe CME5 with Extension and App DL-RHTX with App

Non-destructive concrete moisture check before floor installation

WITH BLUETOOTH AND ACCOMPANYING APP

The Tramex FTK is a compact concrete moisture test kit for instant, non-destructive, quantitative moisture content testing of concrete floors and ambient conditions and is the ideal non-destructive test kit for monitoring the most crucial information at the time of installation.

The Tramex CME5 moisture meter allows for non-destructive quantitative testing of concrete moisture content using Gravimetric testing as a baseline and comparative testing per ASTM F2659.

The Tramex Ambient Feedback Datalogger is used for testing, monitoring and time logging relative humidity, temperature and dew point in the environment. The Tramex Contact Temperature Probe provides temperature readings of the floor surface.

The Tramex Flooring Installer Tech Kit comes with an extension handle in a Tramex Easy-travel case. Bluetooth connectivity to the Tramex Meters App allows for visualization of readings and data reporting to mobile devices, to GeoTag test results, create, save and share photos, reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.

Product Order Code: FTK
Non Destructive
Concrete Moisture Content 0-6%
Gypsum Reference 0-10
Comparative 0-100
ASTM F2659
Ambient Relative Humidity, Temperature, Dew Point, gr/lb
Extension Handle included
Free Accompanying App 
	 
	

		
  • 
			
				KIT CONTENTS
			
		
    • 
		


		  
	
	
	
	
	
	

	

		
  • 
			
				SPECIFICATIONS
			
		
    • 
		


		  
	
	
	
	
	
	

	
		
  • 
			DOWNLOADS
			
    
				
					
						
							Flooring Installer Tech Kit - Data Sheet
						
					
				
					
						
							Concrete Moisture Encounter 5 - CME5 - Quick Start Guide
						
					
				
					
						
							Concrete Moisture Encounter 5 - CME5 - User Guide
						
					
				
					
						
							Tramex Meters App - Getting Started
						
					
				
					
						
							Tramex Meters App - Mapping
						
					
				
					
						
							Tramex Meters App - Dataloggers
						
					
				
			
    
		
    •

    Concrete Moisture Encounter 5  - CME5 - Measuring Range:

    Depth of penetration: approx. ¾" (20 mm)
    Moisture Content for Concrete: 0 to 6%
    Comparative for Gypsum floor screed: 0 to 10
    Reference scale: 0 to 100

     

    Feedback Datalogger DL-RHTX Measuring Range:

    Memory: 100,000 data point entries (samples of Ambient RH and temperature; SurfaceTemperature)
    Logging Rate: Logger interval adjustable between 10 minutes and 1 hour
    Transmission Range: Up to 165ft (50m) line-of-sight
    Bluetooth: BLE Bluetooth Low Energy 4.2 compliant

     

    Relative Humidity Sensor Specifications:

    Range: 0 to 100%RH
    Accuracy: ±1.5%RH Range 0% to 80%RH ±2.0%RH Range 80% to 99%RH (@ 77ºF (25ºC))
    Resolution: 0.1% over the complete range
    Drift: <0.25%RH per year

     

    Temperature Sensor Specifications:

    Range: -40ºF to 257ºF (-40ºC to 125ºC)
    Accuracy: ±0.1ºF Range 68ºF to 140ºF (±0.1 °C Range 20°C to 60°C)
    Sensor Protection: PTFE Film protects sensor opening from water & dust Drift: <0.04ºF (0.03ºC) per year
    Drift: <0.04ºF (0.03ºC) per year

     

    Contact temperature probe (optional):

    Units: ºF (ºC)
    Temperature Range: -20°F to +175°F (-30°C to +80°C) 
    Accuracy: ±0.9ºF from 14ºF to 185ºF (±0.5°C from -10°C to +85°C)
    Resolution: 0.1% over the complete range

     

    Specifications of Kit:

    Size: 13.2” x 9.5” x 3.2” (33.5cm x 24cm x 8cm)
    Weight: 2.8 lbs (1.3kg)
    Power:  3 x AA batteries

     

    Related Products

    Hygro-i2 Probe

    HIPP - HYGRO-I2 PROBE

    The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with BS 8201, 8203, 5325 and ASTM F2170 for the flooring industry, and is ideal foruse by Flood & Water Damage Restoration and Indoor Air Quality professionals. The speed and accuracy of the Tramex Hygro-i2® probes set them apart from all other RH probes on the market. The confidence in knowing you are testing with the best and fastest RH probe, together with the complete Tramex concrete moisture testing system, brings reliability and peace of mind to a whole new level.

    HIPP
    More Info

    Electronic Interface Cable

    RHIE2 - ELECTRONIC INTERFACE CABLE

    The RHIE2  Electronic Interface cable connects the Hygro-i® & Hygro-i2® RH probes to CMEX2 & MRH3 non-destructive moisture meters (Product Order Code: RHIE2) 

    The RHIE2B Electronic Interface cable connects the Hygro-i® & Hygro-i2® RH probes to the Feedback Datalogger DL-RHTX and the CMEX5 (Product Order Code: RHIE2B).

    The Hygro-i2 ® probe provides measurements of humidity, temperature and dew-point in structural materials such as concrete flooring and walls as well as the environmental conditions within the building structure allowing the user to perform in-situ & hood type RH testing to comply with ASTM F2170 & BS 8201,8203, 5325.

    RHIE2
    More Info

    Calibration Check Plate

    CALCRH - CALIBRATION CHECK PLATE

    Calibration Check Plate Tramex CME5, CMEX5, CME4 and CMEX2.

    CALCRH
    More Info

    Infrared Surface Thermometer

    IRT2 - INFRARED SURFACE THERMOMETER

    The IRT2 is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms. It is used to measure and display surface temperatures within the range of -50°C to 650°C (-58ºF to 1202ºF) and has an accuracy of approximately 1 to 1.5% (see Specifications for details). The IRT2 has a fast response time (0.15 sec) and is powered with a 9V battery and complies with Class II UK/EU laser safety standard EN60285.

    IRT2
    More Info