MENU
Moisture Meters
Sensors
kits
Accessories
Industries
Service Centre
News
Tramex Moisture Meters - the authentic moisture meter

Kit

Tramex Concrete Inspection Kit CIK5.1 CMEX2 impedance CMEX2 in situ RH IRT2 in use

Concrete Inspection Kit

A complete kit for testing concrete moisture per ASTM F2659 & ASTM F2170, featuring the Tramex CMEX II moisture meter and Tramex Hygro-i2 ® relative humidity probes. The Concrete Inspection Kit comes in a protective heavy-duty carrying case with die-cut foam lining.

Features

  • Instant, non-destructive concrete moisture content test from 0 - 6.9% with CMEX II to ASTM F2659.
  • Fastest, most reliable Hygro-i ® RH probe for testing to ASTM F2170.
  • Perform multiple tests simultaneously.
  • Re-usable Hygro-i2 ® Relative Humidity probes prove to be the lowest cost per ASTM F2170.
  • Test ambient site conditions of Temperature, RH, Dew Point & Mixing Ratio.
  • Backlit display for ease of reading in low-level lighting.
  • Check calibration of RH probes as often as required by standards.
  • Instant surface temperature readings to avoid condensation.

 

...More info

Product Order Code: CIK5.1

 

1. CMEX II - concrete meter.

2. 4 x Hygro-i2 ® Relative Humidity probe.

3. 12 x Hole liners.

4. 1 x SAL75 ( Calibration Check Salts )

5. Infrared thermometer

 

  • Size: 16.9" x 13.6" x 5.1" (430mm x 345mm x 130mm)
  • Weight: 7.2lbs (3.3kg)
  • Power: 2 x 9 volt PP3
  • Batteries (included)

 

Measuring range:

 

  • Depth of penetration in concrete: (NDT*) approx. ¾" (20 mm)
  • Moisture content for concrete: (NDT*) 0 to 6.9 %
  • Comparative for Gypsum floor screed: (NDT*) 0 to 10
  • Reference scale: (NDT*) 0 to 100
  • Relative Humidity with Hygro-i2 ® probe: 0 to 99%
  • Humidity accuracy: 0% to 99%RH +/- 2% @ 25°C / 77°F *NDT - Non-destructive Test

 

Related Products

Concrete Moisture Encounter Expert

CMEX2

A digital version of the CME4 handheld electronic moisture meter, the Tramex CMEX II moisture meter is designed for the instant and precise measurement of moisture content in concrete and other floors and screeds. 

More Info

Electronic Interface Cable

RHIE2

The RHIE2 Electronic Interface cable connects the Hygro-i® & Hygro-i2® RH probes to CMEX2 & MRH3 non-destructive moisture meters.

More Info

Hygro-i2 Probe

HIPP1

The all new Tramex Hygro-i2 ® Relative Humidity probe is the most advanced and resilient RH probe on the market today. Used in conjunction with the Tramex CMEX2 or MRH3 non-destructive moisture meters the Hygro-i2 ® probe provides measurements of humidity, temperature and dew-point in structural materials.

More Info

Calibration Salt Check

SAL75

Calibration Salt Check for Hygro-i probes. Designed to produce a 75% RH environment within the chamber which may be used to ensure the calibration of the Hygro-i ® RH probe is optimum.

More Info