CME5 Support | Tramex

Get to know your Concrete Moisture Encounter CME5

Thank you for selecting the new CME5 instrument from Tramex.

This page offers useful information relating to your new instrument such as Quick Start Guides, User Guides, optional accessories and calibration instructions.

Concrete Moisture Encounter CME5 User Guides

English:

How to use the CME5

The CME5 and the Tramex Meters App

The CME5 can be used with the Tramex Meters App. This App allows for moisture and relative humidty readings to be visualized and turned into moisture maps, reports and charts for sharing.

Bluetooth connectivity to mobile devices also helps to GeoTag test results, create, save and share photos.

All these can prove to be part of essential data when conducting moisture surveys and investigations.

Compatibility - iPhone iOS 13.0 or later / Android 11 or later.

Accessories for the Concrete Moisture Encounter CME5

There are a number of useful accessories for the CME5 moisture meter which extend its measuring capabilities and ease of use.

Concrete Moisture Probe - The Determinator

The Concrete Moisture Probe provides in-situ Moisture Content readings in a Tramex Unified Concrete Moisture Test Method.

Quantitative Moisture Content measurements are taken in both the top ¾ inch layer and within the body of concrete floors and slabs down to an extendable depth of up to 4" (100mm) and a Diameter 3/4” (19mm).

This cradle with extendable probe measures in-situ moisture content% in concrete floors and slabs and can be used with the CME5.

Learn More

Concrete Moisture Probe - The Determinator

Accessory Pack for CME5

The Accessory Pack for the Concrete Moisture Encounter CME5 consists of

a Calibration Check Plate for regularly checking the calibration of your Concrete Moisture Encounter CME5.
An extension handle which reduces the need for kneeling when taking floor readings and can also be used for hard-to-reach places.
A holster pouch to carry around your meter on site.

These items can also be purchased separately:

Calibration Check Plate for use with CMEX5 and CME5
Extension Handle for use with any of the 5 Series instruments, CME5, CMEX5, ME5 and Skipper 5.

Learn More

Calibration Advice

When doing a moisture survey with the Tramex CME5 it's good practice to regularly check the calibration of the meter before commencing an inspection.

This can be carried out with a Tramex Calibration Checkplate. In combination with the Tramex Meters App, the calibration test results can be geo tagged, helping avoid questioning the validity of the calibration of your Tramex Meter.

Should it be found that readings are outside the set tolerances, it is recommended that the Concrete Moisture Encounter CME5 be returned for re-calibration, click here for more information.

Please note that calibration adjustments should not be carried out by anyone other than Tramex or their authorised service provider who will issue a calibration certificate on completion.

How to Check Your Meter's Calibration and Geotag with Tramex Meters App - Tramex Tips

Register your device

Our CME5 moisture meters can be easily registered within the Tramex Meters app. Click here for information on how to get started.

MENU

CME5 Support Page