Concrete Moisture Probe - Learn About the Tramex CMP
The Tramex Concrete Moisture probe, the Determinator, measures in-situ quantitative concrete moisture content percentage (%MC) in a concrete slab, to an extendable depth of up to 4" (100mm). It is the first moisture probe that can measure moisture content deep within the concrete floor.
Measuring the in-situ moisture content % deeper within the concrete slab can help determine if moisture in the slab is originating from below, within or above. These concrete moisture content readings can prove essential in establishing the next step in fixing moisture problems in a concrete floor or slab.
The concrete moisture probe can fit in the same hole drilled to perform the ASTM F2170 relative humidity test in concrete.
The Concrete Moisture Probe can only be used in a Tramex Unified Concrete Moisture Test Method with a Tramex Concrete Moisture Meter, such as the CME5, CMEX5 or older meters CME4 and CMEX2.
Video Transcript:
The Tramex Concrete Moisture Probe - The CMP.
Also known as "The Determinator"
Extending the capabilities of our "Concrete Moisture Encounter" Range.
Providing in-situ moisture content readings in a "Tramex Unified Moisture Content Test Method".
Quantitative Moisture Content Measurements in both the top three-quarter-inch layer and within the body of concrete floors and slabs.
Completing the connection between in-situ relative humidity tests and surface moisture content tests.
Determine if moisture is coming from above or below the concrete slab surface.
Determine the type and extent of mitigation if needed instant accurate and revolutionary.
Instant!
Accurate!
And Revolutionary!
The Tramex Concrete Moisture Probe - The Determinator!
Innovation in Moisture Detection!
Tramex will be closed for annual holidays from the 21st December 2023 until 2nd January 2024
No orders will be shipping between the 18th of December and the 2nd of January. All orders will be shipped as soon as possible from the 2nd of January.