Concrete Determinator Moisture Probe Kits

Extending concrete moisture content testing deep into the slab

The Tramex Concrete Moisture Probe kits bring concrete moisture testing to a deeper level. The kits provide a combination of quantitative impedance surface readings and in-depth moisture content testing as well as the possibility for in-situ relative humidity measurements in a concrete floor or slab. 

Reading results can help locate any moisture related issues within the slab and help determine if any moisture present is coming from above or below. The concrete moisture probe is used with a Tramex Concrete Moisture Encounter and fits the same drill hole as the one used for the ASTM F210 RH test.

The Tramex Complete Moisture Test System incorporates the concrete moisture probe test method to provide a full and comprehensive moisture content analysis. Readings can be saved and shared in reports with the Tramex Meters App. Click here to learn more about the Tramex Complete Moisture Test System.

Deepening the measuring range

If you already own a Concrete Moisture Encounter you can extend the measuring depth with the Concrete Moisture Probe.

• Supplied in a heavy duty case with an allocated space for your (already owned) Tramex Concrete Moisture Encounter.

• Instant in-situ concrete moisture content readings down to a depth of up to 4".

• Works with the Concrete Moisture Encounter 5, CME5, Concrete Moisture Encounter X5, CMEX5 and with the older concrete moisture encounters CME4 and , CMEXpert 2, CMEX2.

The Tramex Complete Concrete Moisture Test kit

The Tramex Concrete Determinator Inspector kit offers all the instruments and tools to carry out the Complete Concrete Moisture Test - 5 Point test - to provide the most accurate and extensive moisture inspection.

• Non-destructive quantitative measurements of 3/4" into the slab.

• Test a large area in a short amount of time.

• Instant ambient relative humidity and temperature readings with the built-in hygrometer on the CMEX5.

• Extension handle reduces the need for kneeling and readings are visible on the Tramex Meters App

• The Determinator probe measures quantitative moisture content down to 4" into the slab.

• In situ RH testing as per ASTM F2170.

• Surface temperature check with the infrared thermometer for helping to determine dew point.

• Calibration plate to check that all measuring instruments are within the correct calibration specifications.

• Save readings into moisture maps and reports for sharing with the Tramex Meters App

Compare Concrete Determinator Kits

Choose your kit based on the testing methods you need to perform.