The Building Survey inspection kits contain non-destructive moisture meters essential to carry out a thorough moisture inspection or moisture survey of a home or building. The added tools provide measurements of in-situ relative humidity and moisture content deeper within building structures such as walls and roofs.
These building and home inspection tools can detect and measure moisture issues that can negatively impact a building structure. For example, elevated moisture & humidity conditions which may be conducive to mold, microbial growth and wood destroying organisms. The combination of moisture and RH readings provides a clear picture of the moisture and relative humidity conditions behind the surface and deeper within building structures.
The building survey inspection kits offer a variety of combinations of equipment for indoor and outdoor moisture inspection and relative humidity detection within building structures, based on the moisture testing requirements of building and home inspector.
The Building Survey Inspection EZ kit provides fast and accurate non-destructive moisture testing of floors, walls and ceilings with the MRH3.
The MRH3 is a pinless moisture meter and can read through the surface material without damaging or puncturing it.
Measures & evaluates moisture conditions instantly in building materials such as wood, plaster, drywall, brick and roofing.
The reusable Ambient Relative Humidity Short Probe allows for testing ambient and in-situ relative humidity, temperature and dew point readings.
The heavy-duty pin-probe measures moisture content % in wood and WME in other building materials.
The insulated 200mm (7.8") pins allow for deep wall cavity probing.
Learn more
The Building Survey Inspection Kit is a upgraded version of the EZ kit, offering non-destructive moisture testing with the MRH3, ambient RH readings with the reusable RH probe, wood pin probes and electrodes for further investigation.
The Inspection kit furthermore provides:
A hammer pin probe for deeper moisture content readings in wood
Surface thermometer
Calibration salts for calibration checking the RH probe
RH probe hole liners
Learn more
The Building Survey Master kit is the ultimate solution for non-destructive testing of moisture content and humidity conditions in a variety of building materials, flooring, roofing and air spaces. The kit offers:
Non-destructive moisture testing of floors, walls, and ceilings with the MRH3.
The Roof and Wall Scanner can be used to detect moisture on external building walls and roofs, such as in EIFS structures and built-up roofing systems.
Reusable Ambient Relative Humidity Short Probe allows for testing ambient and in-situ relative humidity, temperature and dew point readings.
Heavy-duty pin-probe for measuring moisture content % in wood and WME in other building materials.
Insulated 200mm (7.8") pins allowing for deep wall cavity insulation probing.
Instant surface temperature readings can be taken with the infrared thermometer and can be part of a dew point check.
Calibration salts for calibration checks of the RH probe to ensure accurate readings.
RH probe hole liners.
Learn more
Choose your kit based on the testing methods you need to perform.